|
| |
| RAYON
DYEING |
Selected Direct Dyes
10 gram/liter sodium sulfate
Soft Water
Bath Ratio: 1:30
Heat up to 90°C, and keep 45min |
| |
|
RAYON DYEING
(Cotton Dyeing)
|
Selected Reactive Dyes
A
15-40 gram/liter Sodium Sulfate
B
10-15 gram/liter Sodium Carbonate
C
Heat up to 50°C-60°C, and keep 45min.
Bath Ratio: 1:30
Soaping: 1-2gram/liter Neutral soap 60°Cx10-20min.
No Mercerization process applicable. |
| |
|
| WOOL DYEING |
Selected Acid Dyes
3% owf Ammonium acetate
Soft Water
Bath Ratio: 1:30
Heat up to 90°C-95°C, and keep 30-45min. |
| |
|
| ACETATE
DYEING |
Selected Disperse Dyes
1.0 gram/liter Disperse Agent
Heat up to 90°C, and keep 45 min. |
| |
|
POLYESTER
DYEING
For lighter color only |
Selected Disperse Dyes
1.0 gram/liter Disperse Agent
5.0 gram/ liter Carrier
Bath ratio: 1:30
Reduction & Washing 2.0 gram/liter Non-Ionic
Surface Active
75°C X 20min. 2.0 gram/liter Hydro-Sulfate Sodium
*** Without Alkali (No Sodium Hydroxide)
|
| |
|
| ACRILIC
DYEING |
Cationic Dyes
Acetic acid
1.5%owf
Sodium Acetate
1.0%owf
Cationic Surface Active
2.0%owf
Soft Water
Bath ratio 1:30.
o.w.f.= On the weight of fiber |
| |
|
| SILK DEGUMMING |
5.0 gram/liter Marseille Soap
1 gram/liter disperse agent (Non-Ionic)
(No Sodium Carbonate)
Check ? Max. PH 9.0
Heat up to 90°C-92°C , and keep Max. 90-120
min.
OR
10.0 gram/liter Marseille Soap
0.5 gram/liter Sodium Carbonate
2.0 gram/liter disperse agent (Non-Ionic)
Check ? Max. PH 9.5
Heat up to 90°C-95°C , and keep Max. 60min |
| |
IMPORTANT |
| Resistance
durability would be declined if the yarn is elongated
during weaving or knitting.
Re-dyeing not applicable.
Please avoid all possible procedures in acidic and
alkaline environments.
The above data are obtained from our laboratory tests
and are only indicative.
All customers are recommended to make their own laboratory
tests in order to find the best possible conditions
of protecting Metallic Yarn. |
| |
 |
